Home : LFC Fleet
N2438F - C182T G1000
Fly this beautiful new Cessna 182! For cross country trips, the 182 is a fantastic performer, truing at about 150 knots. The G1000 system is a joy to fly on cross-country trips.
All information herein applies to the Skylane (Model 182T).
The Skylane aircraft is an all-metal, single-engine piston, high-wing monoplane with a four-person seating capacity including a crew of one or two. Suitable allowance for luggage is provided.
The Model 182T is certified to the requirements of U.S. FAA Federal Aviation Regulation Part 23 through amendment 23-6, including day, night, VFR and IFR. |
|
Performance
All estimated performance data are based on airplane weights at 3,100 pounds; standard atmospheric conditions; level, hard-surface, dry runways; and no wind. They are calculated values derived from flight tests conducted by Cessna Aircraft Company under carefully documented conditions and will vary with individual airplanes, pilots, and numerous other factors affecting flight performance.
|
English |
Metric |
| |
english |
metric |
| Cruise (55% power @ 10000') |
|
|
| range |
968nm |
1793km |
| duration |
8.05hr |
|
| |
|
|
| Cruise (75% power @8500') |
|
|
| range |
845nm |
1565km |
| duration |
6.05hr |
|
| |
|
|
| Engine: Textron Lycoming IO-540-AB1A5 230 BHP at 2,400 RPM |
|
|
| |
|
|
| Propeller: 3-Bladed Constant Speed, Diameter |
79in. |
2m |
| |
|
|
| Rate of climb (sea level): |
924ft/min |
282m/min |
| Service Ceiling: |
18,100' |
5517m |
| Speed |
|
|
| Max at sea level |
149kts. |
276kph |
| Cruise (75% power @ 8500') |
145kts |
268kph |
| |
|
|
| Stall Speed, CAS |
|
|
| Flaps Up, power off |
54kts |
100kph |
| Flaps Down, power off |
49kts |
91kph |
| |
|
|
| Takeoff Performance |
795ft |
242m |
| Total distance over 50' obstacle |
1514ft |
461m |
| |
|
|
| Landing Performance |
|
|
| Ground Roll |
590' |
180m |
| Total distance over 50' obstacle |
1350' |
411m |
| |
|
|
| Wing Loading |
17.8lb/sq. ft. |
86.9kgm/sq. m. |
| Power Loading |
13.5lb/hp |
6.1kg/hp |
Resources
See all resources... |
